Minimal design modular Orchid vase support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The flowering season of orchids just begun. Common problem after flowering, They tend to tip over due to flowers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
The flowering season of orchids just begun. Common problem after flowering, They tend to tip over due to flowers.
This may resolve this problem, by inserting the flowering pot into this support, acting as an outrigger.
Print and assembly instructions:
Print as many supports as You like from minimum 3 up to infinity, after print enlarge the holes to 3mm (due to inaccuracies of STL files)
No support needed, just print the parts (can be from different colors due to the modular design)
The Big ring is 130mm diameter.
The small ring is 30mm diameter.
Use superglue to fix everything together.
The assembled part is designed to fit a pot with 100mm bottom diameter. If You want other sizes just resize the rings. The difference in diameter should be 100mm between the two rings. Due to its flexible design it slightly clamps on the pot as the weight of the flower pushes down.
I printed from Formfutura rPLA Venom Green filament.