Jumper T-Lite Neck Strap Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small mount/ring to allow a neck strap clip to secure the controller
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 153
- Wydruki
- 1
- Wyświetlenia
- 1473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is not my original idea. I re-designed it based on this:
https://www.thingiverse.com/thing:4893640
so all credit can go to the original designer.
Requires full disassembly of the controller to get to the translucent power LED stub.
Check this video to see how it is installed (among other things that were fixed in the controller):
Print Details:
Try using a transparent or translucent filament to allow power LED to shine through. Also, use the same transparent/translucent filament piece as the secure “tab” inside the controller. This will allow more light to shine through from the power LED. In my YouTube video, I used a black piece and a kind commenter brought this to my attention. :)
PLA+ or PETG should be fine. Haven't had any issues for me with either material.
Print Orientation: flat on it's side so the large circle ring is drawn on the bed