1 / 2
Franke Perlator/Aerator Key 4-prongs ~25mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 prongs version with ~25mm internal diameter
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 687
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
I was unable to find such a key for franke pescara slide-in perlator.
Printed in standard PLA. Add a raft for good measure because a footprint is rather tiny and likes to detach
with 0.6mm nozzle and 2 perimiters you'll get a nice, tight fit
with 0.4mm nozzle you should probably aim for 3 perimiters, but I've not tested it.