➖🔘 Round rod - modular handle system (with HIDEOUT possibility)

Info:

• decided to realize one more idea for furniture handles
  • this time very simple design of round rods (they are printed standing)
  • easily adjustable for any length between thread holes
• M4 threads on the bottom of each holder for attaching to furniture
  • threads are printed horizontally, but they worked very well for me on given settings
• possibility to scale ↕ the rod to any length
• added possibility for HIDEOUT 🔐👮!
  • hollow rod + covering cap

Print instructions:

• see 3mf
• ❗ 0.2 mm layer height, 0.4mm nozzle => with theese the thread works for me well, other settings may not work nicely, but you may try
  • the thread will be too loose probably on bigger nozzles or higher layer hight
• no supports
• no brim needed
• print rod standing
• tip: seam (applied in attached gcodes + 3mf)
  • place seam on the rod - on one side (so it can be turned to the furniture)
  • place seam on the holder - on the back or inside, so it is invisible

If you want different size / distance between thread holes

• just scale the rod

Assembly:

• use M4 bold (up to 20mm) to tighten the rod in the holder
  • be careful, not to screw it much, as rod can be broken
  • they goes in the side holes
• then use another M4 (longer, required length depends on your furniture) to attach it to the furniture
  • for the middle hole

Tips:

• if you plan to use hideout hollow rod:
  • create some rods/handles with full body and for example only one hollow handle with hideout → will make it harder to spot the difference
  • you can have whole body in the same color (rod+cap) or having cap with different color
• you can even create continuous endless rod, by having the adjacent surfaces inside the holder, the connection will be invisible - and both rods can be tighten with bolts inside