AAA Battery Dispenser that won't jam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Automatic battery dispenser for AAA batteries. This design will not jam.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 265
- Wydruki
- 2
- Wyświetlenia
- 1271
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired and frustrated after printing other dispenser designs and having them jam after only a few batteries were dispensed. So I came up with this jam-free design and it really works well and will hold 39 batteries.
If you lay the model down on its side on the printer bed, you only need a very tiny amount of support from the bed only. All it has to support is the curl of the 3 dispenser chutes.
Hints on gluing the side cover.
Be very careful when gluing the Side Cover to the dispenser.
If you use too much glue there is a chance it will ooze into the battery chutes and interfere with the dispensing. Use glue very sparingly to avoid this.
I used epoxy glue on PLA and it worked fine. I prefer epoxy as it gives you lots of time to get perfect alignment.
Here is a video of the AAA Dispenser in action:
https://www.youtube.com/shorts/EaUFm9V1GyU
My AA Dispenser can be found here:
https://www.printables.com/model/309397-aa-battery-dispenser-wont-jam