2.5" x2 ssd drive bay for SuperMicro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a SuperMicro 6028U-TRTP+ 2U server and needed to install a 2.5" ssd. This chassis has an option for a dual…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I bought a SuperMicro 6028U-TRTP+ 2U server and needed to install a 2.5" ssd. This chassis has an option for a dual 2.5" internal bay, but mine didn't come with one. So I designed and printed my own.
I couldn't find a good place to buy a SuperMicro peripheral-SATA power cable, so I spliced together my own. I recommend buying one if you can.
I found that the hex grid was strongest oriented so it had flat bridges instead of vertical pillars, so print the drive bay so that it's standing up tall-ways.
Category: Electronics