AEG / Electrolux Dishwasher lower basket roller and shaft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
shaft and roller for aeg / electroluxx dishwashers lower basket
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 141
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I had my dishwasher shaft being bent and rollers weren't doing their job due to this. Basket wasn't standing on the side and and blocking lower sprayer.
I designed this shaft expecially to be sturdier.
Due to dishwasher temps going up to 70c, it needs to be printed with PETG at least. PETG chemical resistance also better than ASA or ABS.
It needs to be printed horizontally so requires som support on roller side. otherwise it'll break when it is printed vertically.
I have being using this design without any issue for 10 months now.
I also added 8mm and 9mm thick rollers so that you can prin in any color you want.