1 / 7
Aquarium lid and light holder for Juwel Lido 120
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aquarium lid and light holder for Juwel Lido 120
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 751
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
These holders allow for customising your aquarium lid and light of a Juwel Lido 120. The holders are suitable for aluminium profiles of 2 x 20 mm and printed in PTEG with a nozzle of 0.6 mm.
Instructions:
- Cut the aluminium profile at the desired length
- Insert the profile into the holders
- Drill holes of 4.5 mm for the screws
- Secure with Allen bolt stainless screws (M4 x 8 mm)
Additional holders allow for a glass cover (see photos)