Electronics Enclosure SKR v1.4 Turbo BTT EXP-MOD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Electronics Enclosure for SKR v1.4 Turbo main board and BTT EXP-MOD stepper motor expansion board.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 824
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a work in progress and will be updated as I finish my build and dial in the part.
Custom enclosure for Big Tree Tech SKR v1.4 Turbo main board and BTT EXP-MOD stepper motor driver expansion board. The cooling fan used is from the stock ender 3 electronics enclosure. The lid has ducting for optimized stepper driver cooling, while still achieving sufficient cooling of the main board.
Cutouts for the mini-SD card and USB-B ports line up with the SKR v1.4 turbo board. The offset exhaust port leaves space for power cables on the EXP-MOD.
4 screws are required to hold the lid on, and only one for the fan. Various cutouts for wires provide a clean look once assembled.
Print Settings
Printer:
Ender 3
Supports:
No
Resolution:
0.2mm
Infill:
10%
Filament material:
PLA
Be sure to upload a picture of your make! Feel free to reach out for different configurations, I can work with you to create a model that fits your needs.