PrusaSlicer Profile for Cetus Mk3 (or mk2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Cetus MK3 (or MK2!) requires some interesting gimmicks to work on Prusaslicer, but now I've done that work for you!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
https://github.com/ast0815/slic3r-for-cetus Based loosely off of this man's work. However, his python script tends to be slow and so I've eliminated it. I've put the necessary changes all into the filament settings: the rest is just the typical optimization and tweaking for my machine.
Download the “.ini” file and, in prusaslicer, click “file”→"import"→"import config bundle…". Select the downloaded file and enjoy.
Please post your tweaks here and respond with feedback on how it works. I'll read them, try tweaks and try to improve this for everyone to use.
IMPORTIANT INSTRUCTIONS
Go into the filament settings. As it instructs in the filament “notes” section, you must remove the decimal place in front of the extrusion multiplier, making it 22 instead of 0.22. I can't export the config file with anything more than ~4, or else I would've done this step for you.
On that note, when you slice, the filament length report is wildly inaccurate, but the weight and cost should be if I interpreted the fields there right.
Make sure to calibrate your z offset.
-Moke