Router Table Infeed Guide (Jess-Em)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable Router Table infeed guide for Jess-Em Router table fence.
- Ocena
- 3 / 5
- Polubienia
- 79
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 1198
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I designed this infeed guide to work with a router table I built using Jess-Em components. It requires three 1 inch ¼-20 bolts, a 608 skate bearing, and a couple of o-rings that fit snugly on the outer ring of the bearing. The nuts go in the knobs and a couple of drops of super-glue is handy here. I had to try a few different o-rings before I found some that were the right size and had a little sponginess to allow them to work well. Included is a small shim that goes inside the 608 bearing to adapt it to the bolt diameter. I also included a left hand guide plate.