ART DECO DRAWER PULLS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print, elegant Art Deco style drawer pulls in one or two colours.
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an elegant Art Deco style drawer pull to compliment my Art Deco Cupboard Handle design.
There are three mounting holes - if replacing an existing handle or knob, simply use the central position with a single screw, but if a little extra security is necessary use the two outer holes.
You can accurately locate the holes using a CUPBOARD HANDLE DRILLING TEMPLATE model which was designed for use with this handle.
Two options are provided; the first has holes threaded for an M4 bolt (3/16" seem to work fine). These threads are printed on their sides and require a little effort but work effectively, however I prefer to run an M4 tap through just to clear them a little.
The second option, which is my preferred is set up for threaded inserts such as THESE.
I have printed these in a variety of combinations of PLA, 0.2mm layer height with a .4mm nozzle. No supports are necessary and at 0.2mm colour changes as shown are at 3.6mm (layer 18) and 12.6mm (layer 63).