Google Nest Wifi Point UK Socket Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the google nest wifi point (not for nest wifi router) to hang off the socket and sit flush against a wall.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 251
- Wydruki
- 4
- Wyświetlenia
- 1275
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A holder for the Google Nest Wifi point (untested for the router) to hold the cables and fit flush against the wall.
Simply slots onto the power adapter and hangs off of a socket. Only tested with a UK socket. Designed for a 14mm deep socket to sit flush against the wall. I've provided the design as .step if needs modification. Check you have enough space underneath your socket.
Added cable tie holes to keep the cables tidy in the back of the mount (works without so opptional)
The design does block some of the speaker holes, but in practise still just as loud and enough is exposed to not have too much of an impact. Lights are still visible.
Print with supports with the flat face facing the build plate.
Printed using ABS on a Voron 2.4 with 40% infill and 0.2mm layer height.
----------------
UPDATE 13/11/2022: Cut-out some areas of the mount to allow more sound to pass through, audio of original design was slightly muffled.