1 / 1
Filament Cutter 45deg with a new top that takes M3 nuts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix I added added slots the top for M3 nuts.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 80
- Wydruki
- 5
- Wyświetlenia
- 787
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (27)Powiązane
I made a new top button a bit taller and put in slots for M3 nuts. Adding M3 screws (30mm) with nuts reduces plastic fatigue. Insert the nut with one of the nut's chamfered edges pointing out. I Remixed the body also with deeper channels for the button, this helps a little with longer springs, but it's not necessary. The top button should be a direct replacement for the original. Also note the slot for the nut is intentionally a tight fit so your printer should calibrated especially horizontal hole expansion.