Print In place slam latch drawer pull
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a slam latch drawer pull, mostly print in place (two parts slide together). No Supports
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I am building an adventure van and want a drawer that can be locked shut while driving. It would be ideal if the latch could be disengaged in the same movement as opening the drawer so I never have to remember to latch it.
I have included a template to aid with installation. This video has an example of its use and the drawer pull being mounted.
Slam Latches are not an original idea, but I hope this mostly print in place one moves the concept into additive manufacturing.
Edit: Depending on your printers bridging prowess, some light sanding might be needed to fit the pull into the drawer latch.