1 / 5
Filament Cutter Holder for Mounting on 2020 Size Aluminum Extruded Profiles — zdjęcie 1
1 / 5

Filament Cutter Holder for Mounting on 2020 Size Aluminum Extruded Profiles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This filament cutter holder attaches to the enclosure of the 3D printer made with the 2020 aluminum extrusion profile.

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
407
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

I made this to attach my filament cutter to the enclosure of the 3D printer.
私が使っているフィラメントカッターを3Dプリンターの筐体に取り付けるために作りました。

I took a photo of this, imported it into Fusion360, sized it using a cutter mat grid, and shaped it to fit the profile.
これの写真を撮ってFusion360に取り込み、カッターマットのグリッドを使ってサイズを合わせ、輪郭に合わせるように形を作りました。

You will need one M3 nut and one M3x8mm screw for mounting.
取り付けにはM3ナットとM3x8mmのネジがそれぞれ一つ必要です。

The T-slot nut adapters included in the PrusaSlicer project file and gcode file were made from the following model
PrusaSlicerのプロジェクトファイルとgcodeファイルに含まれるTスロットナットのアダプターは以下のモデルで作成したものです。

https://www.printables.com/model/72612-t-slot-nut

The parameters set are as follows
設定したパラメータは以下の通りです。

Tagi