1 / 2
Woodpecker CNC board enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a cheap CNC and the controller board is just mounted bare on the frame, not great if you get metal chips in…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- BSD License
I bought a cheap CNC and the controller board is just mounted bare on the frame, not great if you get metal chips in it so I made this cover.
There are no vent holes, the idea in my head was creating positive pressure the air can just go out the cable holes and stop dust getting in them, but I included the Fusion 360 files if you want to add them.
Print instructions
Print it however you want. I used 0.15 layers with 15% infill and no supports which took about 6 hours for both parts on the MK3S