Bird Buddy Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mounting for a Bird Buddy feeder that allows 360 degree rotation of the birdfeeder.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 179
- Wydruki
- 2
- Wyświetlenia
- 1373
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A wall mounting for the Birdbuddy birdfeeder. Fits the post hole snugly, but allows 360 degree rotation of the feeder for a better backdrop. There is a chamfer in the post to make it much easier to slide the birdfeeder into place. Local birds seem to enjoy using the stand as a place to queue for the feeder.
I've used 7 x 1⅝" decking screws to attach them. There is a flat surface behind the post that can be used to level the stand before applying the second screw to anchor the mount in place. Be careful not to overtighten or you're likely to crush your print.
Printed in PETG at 0.20mm layers and 20% infill this will handily support a feeder full of food and any birds that land on it. Do not attempt to do pullups on it. Squirrels are fine, but bears or racoons will probably be too much weight.
gcode provided for Mk3 and Mini, it should print comfortably from both.