Orc (light infantry)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I like fantasy miniatures, so I create my own orc. I modeled, rigged and sculpted this orc in Blender.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I like fantasy miniatures, so I create my own orc.
I modeled, rigged and sculpted this orc in Blender.
Print instructions
This is my first rigged, printable miniature.
That's why the mesh is not perfect, but with fdm-printer it works fine and I hope with sla too!
The diameter of the base is 24mm.
My settings:
-I add a STL with support, that's how I print this figure(more support doesen't matter)!
-layer high: 0.1mm
-nozzle: 0.3mm
-cooling: 100% after the 2. layer
- print with "Brim" 20mm( there are some overhangs, so the nozzle could/will touch the print if the cooling isn`t enough.
I remove the support with a sharpe thin and heated knife.