Simple Raspberry Pi HQ camera box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping…
- Ocena
- 4,75 / 5
- Polubienia
- 39
- Pobrania
- 593
- Wydruki
- 9
- Wyświetlenia
- 3649
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- BSD License
This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around.
To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with some 2mm self tapping screws. Slip the lid over that and into place, and screw the lid down with some more 2mm screws. Be careful not to let dust get into the sensor module while assembling and immediately reattach the focus ring and cover.
This is shared as BSD license, I encourage anyone to take this design, improve it, and make a commercial product for me to buy.