1 / 7
Ender 5, Pro, Plus Belt Tensioner X and Y — zdjęcie 1
1 / 7

Ender 5, Pro, Plus Belt Tensioner X and Y

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple and strong (if printed correct) belt tensioner for X and Y on Ender 5, Ender 5 Pro and Ender 5 Plus.

Ocena
4,667 / 5
Polubienia
261
Pobrania
1975
Wydruki
15
Wyświetlenia
9077
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Updates:
16.11.2022 - add the X version for my linear rails. Test it with my custom mount but should work with an other models.

 

PRINT SETTINGS

3-4 perimeters, 25%+ infill, a 10-15mm brim will help, outer part and knob could be from PLA but inner part must be from PETG or stronger. For the parts to be stronger, print orientation should be like this without any supports.

BOM
  • 2 x M5x10mm Socket Head Screw
  • 2 x M5 T-Nuts
  • 1 x M8x30mm Socket Head Screw
  • 1 x M5x30 Hex Head Screw
  • 1 x M5 N-Lock Nut

In order to keep the belts perfectly align through profile I highly recommend the Belt Bearing Spacer mod. 

This tensioner is based on Justin Thursday model.

Tagi