The climber for monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The climber by Like_VL in another pose
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 629
- Wydruki
- 7
- Wyświetlenia
- 2863
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
I loved “The Climber” by Like_VL but wanted it in another pose so I created this.
The magnet I used is 10x10x5mm so the anchorpoint is adjusted for this. I've used superglue and manually melting filament to hold the magnet.
I used some 0,8mm wire to emulate the rope, primed everything and painted it black.
Created in Fusion 360.
Original model by Like_VL: https://www.printables.com/model/222202-the-climber
Pose I used for my model: https://www.dreamstime.com/rock-climbing-vector-silhouettes-hand-drawn-eps-logo-icon-crafteroks-silhouette-illustration-different-uses-image146466382
Also this is my first upload so sorry if I missed anything.
It's also my first non-practical model so please don't judge me by my mistakes :)