Extruder Stepper Motor Rotation Indicator Visualiser / Visualizer - Scotland Flag / Scottish Saltire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to add a rotation visualiser to my Prusa MK3S printers, but didn't fancy any of the designs already out there.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 835
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to add a rotation visualiser to my Prusa MK3S printers, but didn't fancy any of the designs already out there. As a proud and patriotic Scotsman, I thought I'd fly the flag for my country whilst 3D printing!
Make sure that you use PETG so that the plastic doesn't soften due to the stepper motor heat. Use superglue to stick neodymium magnets to the visualiser, using sandpaper to rough up the mating faces first.
I recommend that you use 8mm x 3mm magnets. You may get away with one magent, but clearance can be tight, so I often find that use need a space (stl included) or two magnets glued in a stack works well...or you could use 8mm x 6mm magnets and save on glue.
Prusa Slicer or Prusa's Colour Print tool are the easiest way to switch colours. For those methods, assumimg you're using 0.1mm layers, add in the following colour change points:
Layer 1: Black
First change: Layer 13 / 1.40mm : White
Second change: Layer 16 / 1.70mm : Azure Blue
Third change: Layer 21 / 2.20mm : Black
Print instructions
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
100%
Filament_brand:
Various
Filament_color:
Black / White / Blue
Filament_material:
PETG