1 / 6
No-Fog Coolant Mist Spray Mount Kit For Knee Mill — zdjęcie 1
1 / 6

No-Fog Coolant Mist Spray Mount Kit For Knee Mill

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I found a bunch of different plans for a DIY no-fog coolant spray system for standard knee mills so I decided to make…

Ocena
0 / 5
Polubienia
17
Pobrania
54
Wydruki
0
Wyświetlenia
544
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I found a bunch of different plans for a DIY no-fog coolant spray system for standard knee mills so I decided to make my own. These are the parts I designed to mount the spray tube to the spindle.

I originally made the arms 6" long and after printing realized they were too long. I shortened them to 3" and they work great. Clamp ID is 85.25mm. This fits perfectly on out Supermax knee mill and should work on others, or you can modify the part to suit your needs.

Print Settings

Printer:

Folger Tech Prusa i3 2020

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

25%

Post-Printing

Drill holes out to 0.201" (#7 drill) for 10-32 screw clearance. Tap two side holes in "Bracket" with 10-32 tap. I used 8mm OD copper pipe with a 0.030" welding tip threaded onto the end.

I've also attached the PDF for the mixing block drawing. I made that from aluminum. There is a needle valve on the coolant side and on the air inlet side to get the pressures and flow just right.

Use 10-32 x 1.5" socket head bolts with washers and nuts to assemble and tighten to get your desired clamping force on the assembly.

How I Designed This

Designed in Inventor 2015.

Category: Machine Tools

Tagi