Clip for swinging baby gate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our metal baby gate doesn't like to stay against the wall and as such it tends to swing outwards a bit. So I designed…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Our metal baby gate doesn't like to stay against the wall and as such it tends to swing outwards a bit. So I designed this clip to screw to the baseboard and hold the gate open. The clip opening is for 1/2" round bar and the base accommodates two #6 countersunk screws.
Print Settings
Printer:
Folger Tech Prusa i3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Notes:
Printed with Gizmodorks black PLA at 60C bed with blue painter's tape and 220C nozzle at 0.4mm diameter. Took about 30 mins.
Mount!
Just get a pair of #6 countersunk screws and mount where needed!
Design
I used SketchUp Make to design this part. I left clearance for the bar to fit securely but not too tightly. The arms are left thin enough to flex.
Category: Replacement Parts