1 / 5
Auger paddles for a Scotts Turf Builder Pro EdgeGuard seed spreader — zdjęcie 1
1 / 5

Auger paddles for a Scotts Turf Builder Pro EdgeGuard seed spreader

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My friend's dad kept losing the original hopper paddles for his walk-behind spreaders. These fit snugly on the hex

Ocena
0 / 5
Polubienia
15
Pobrania
363
Wydruki
1
Wyświetlenia
1205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

My friend's dad kept losing the original hopper paddles for his walk-behind spreaders. These fit snugly on the hex shaft and also drop down 1/4" into the hole in the hopper to minimize the slop in the shaft. These were printed in PLA and the hex hole size is 0.44" whereas the shaft size is 0.43". The shrinkage in the PLA makes these fit perfectly. They've been tested with four bags of seed so far and work great!

These were designed for the Scotts Turf Builder Pro Edge Guard spreader but should work with any other walk-behind spreader with a 0.43" hex shaft and 2" diameter paddle.

Category: Hand Tools

Tagi