1 / 3
Adjustable shelving feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable feet for metal shelving unit
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 664
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (79)Powiązane
Adjustable feet for cheap metal shelving units made from 0.9 mm thick profiles.
Each foot uses M6 bolt and nut. I used two part epoxy glue to glue them to printed parts. For very uneven floor just use longer screws :).
Printed in PETG, 3 perimeters, 25% gyroid infill, without support.