Apollo Launcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Launcher portion of the LUT the structure that held the Saturn V for launch.
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 657
- Wydruki
- 0
- Wyświetlenia
- 2766
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
Due to the 1:60 scale of this model it is rather large, almost 32" x 27", the model consists of a wooden box that is skinned by 3D printed parts.
Note that there are decals in the Other Files section. These work well when printed on vinyl decal sheets using best quality.
This is part of the launcher platform of the larger LUT model, Apollo Umbilical Tower - New.
Updates:
3/14/2024: Updated instructions. Widened side skins 11 & 22 to fit fixed interfaces.
6/5/2024: Added launcher parts file.
8/16/2026: Tweaked Launcher Skin 1
8/17/2026: Added the farscape1 Tail Service Mast parts since they are no longer available on Thingverse and were published under the Creative Commons NonCommercial license.