Cover for 5v 40a PSU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had to mount the PSU for my LEDs up on the ceiling and didn't want the cable contacts uncovered
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Had to mount the PSU for my LEDs up on the ceiling and didn't want the cable contacts uncovered. Also as I was on the job I added a socket for a power cable, a switch and some barrel conectors so I don't have to take of the cover every time I have to change the conections or in case I have to move the PSU. Left pictures of the different hardware I added to the cover.
I also used a couple of m3 screws to attach everything. My PSU came with some holes for these screws so you might have to drill some if yours doesn't
Don't know if PSUs have standard measurements but mine is 20 x 11 x 5 cm (length x width x height)
| Material | PLA |
| Layer Heigh | 0,2 mm |
| Nozzle | 0,4 mm |
| Supports | no |