Ice Scoop basket/holder for Costway Ice Maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ice scoop holder/bucket for Costway model 22769SL-CYPE-CS (may fit others)
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 738
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I really liked this model but it was just a touch too small for my particular scoop. I've moved over to printables and I didn't see this here so I figured I would upload my version and credit the original on thingiverse.
I increased the outside width by 7mm and the depth (front to back not top to bottom) by 4mm. It fits perfectly now and has a little bit of room around it so I'm not fighting to put it in or out.
Printed in PLA with 5% honeycomb infill (should not matter at all though I did lightning first and the walls were totally hollow so I figured I'd give a little something in there)
I attached mine with hot glue and the old painter's tape trick. Working great!
Here is a link to the product on Amazon as of Nov 8, 2022.
Original design by phantomedChai
https://www.thingiverse.com/thing:5272548