1 / 7
Simple Foldable Phone/Tablet Stand - Print in place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Phone/Tablet stand, that is foldable. This is meant to print in place and will need some small supports, tolerances should work if you scale up or down +-30%.
Enjoy!
Edit 1: Added V2 which is bigger and should be able to fit bigger/heavier phones and tablets. still will need small supports
Print Settings
Printer:
Odin 5 F-3
Rafts:
No
Supports:
Yes
Resolution:
100
Infill:
25
Notes:
Use at least 3 walls to make sure it's sturdy. Infill recommended is at least 25%. Print with supports, use line or zig zag at a 10-20% density.
Category: 3D Printing