Yet another arm aka camera holder, but thicc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just yet another camera arm / camera holder, but boy, it's thicc! No hardware required (kinda)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Tired of searching proper camera arm / camera mount for your printer?
Existing camera mounts are flimsy or being broken during assembly?
Assembling camera arm requires a lot of extra nuts and bolts?
You already printed tons of different camera holders but none are mathing your expectations?
Today you can print one more!
Sturdy camera arm / camera mount you can assemble without* (kinda) metal nuts and screws
Includes:
- 100 mm arm straight
- 100 mm arm 90 degree
- 6mm tall nut
- 10mm tall nut
- base mount for 2020 extrusion
- ¼ inch screw for securing action camera
- ¼ inch nut
- lock .step file for easy remixes
Arms have two variants: 0.1 gap and 0.03 gap. Check photos. Use 0.03 gap if you can setup your slicer to actually print this gap, otherwise use 0.1 gap variant. This gap is used to reinforce structure.
*Installing base requires two t-nuts.
If you like this model, then please remix it and add adapters of your choice!