Ratchet strap winder / Spanngurtwickler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gadget helps a lot to wind up ratchet straps very fast.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After I had to wind up tension belts again and again, at some point I didn't feel like it anymore. At this point I decided to build a tool that would make this job a lot easier, so I designed and built this winder. The winder works for any straps up to 50mm width. For printing it I used pctg, but many other materials should work too. Aditional parts for building: 2x 32x12x10 ball-bearing, 1x m2x20 screw (or a stud), 16mm diameter tube, m5 bolt for the crank, a heatshrink and finally some general tools and some glue.
Following this link you can see a prototype version in action (final version works the same way): https://youtube.com/shorts/rRzZocEMrlk?feature=share
Hope you enjoy this tool ;D