1 / 1
Coat hanger for car (Dacia Duster, but parametric to fit other cars) — zdjęcie 1

Coat hanger for car (Dacia Duster, but parametric to fit other cars)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Coat hanger for cars lacking built in hangers. Secured with ziptie. Parametric model can be customised.

Ocena
5 / 5
Polubienia
53
Pobrania
391
Wydruki
3
Wyświetlenia
1592
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Coat hangers for cars that lack built in ones. These are placed over the hand holds above the back doors and secured with a zip tie.

As every car and zip tie is different, parametric FreeCAD models are attached where you can edit the spreadsheet to adjust various parameters such as the size of the handle bar the hook goes over and size of the zip tie holes. The 3mf files fit Dacia Duster 2021 at least.

UPDATE: There used to be two variants, one with a hole for the zip tie and one with a slot for it. I have removed the slot version as the zip tie slipped off when I bumped the hanger while loading goods in my car. The version with the hole is much more secure!

Cautions!

  • A car can get hot in summer, even at high latitudes. PLA is NOT suitable. Consider using PETG or some other material that is more temperature resistant.
  • Loose objects in cars are dangerous in case of a sudden braking, accident etc. Use a zip-tie to secure it so that it cannot fly off!
  • Any modifications to your car are done at your own risk (obviously).
  • Use common sense in using these.

Notes

  • The source model was made using the experimental LinkStage branch of FreeCAD and may or may not work on the latest release as is.
  • The FreeCAD file contains a drawing that can be used to print an 1:1 sized paper template to check the fit. This is cheaper, quicker and faster than printing the part and finding out that it doesn't fit! A good first check.
  • Supports are NOT needed.
Sizes

The model is parametric and sizes can be changed. Do note that some chamfers might complain if you adjust it for a larger zip tie. Either make the chamfers smaller, or make the overall thickness larger to compensate.

That said, the 3mf files are suited to:

  • Zip tie: 1.1 mm thick, 2.45 mm wide
  • Handle bar in car: 21 mm tall by 14.5 mm wide. The short ends form half-circles.

Tagi