1 / 4
Rotating toy similar to gyro - Print in Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was originally a test I made for printing moving parts in place, which turned out to be a fun toy.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 139
- Wydruki
- 3
- Wyświetlenia
- 508
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (19)Powiązane
To print this you printer has to be able, to cleanly print the 0.2mm gap between the rings.
Print settings:
- no supports needed
- printed in PLA, but other material should work
If one of the rings does not rotate well, you can press it together from the outside, while rotating a few time, to loosen it up.