Paracord (550) Cinch (good for masks)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a simple cinch to hold paracord (550 cord) easily so I didn't have to tie the paracord for cloth masks.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 869
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a simple cinch to hold paracord (550 cord) easily so I didn't have to tie the paracord for cloth masks. (ran out of elastic) This has enough friction to easily slide up against the back of the head and then hold in place.
For thicker 550 cord print at 100%.
For thinner cord I've had good success at 95%
The slot in the middle is designed to help push the paracord through.
I've included the fusion 360 file so you can edit it as you need/see fit.
Print instructions
Print at high resolution (prints great/fast at 0.12) so the angles to assist come out.
PLA
No raft or support required.