Sliding cigar ashtray / Zigarren Aschenbecher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sliding ashtray with an integrated cigar rest.
- Ocena
- 4 / 5
- Polubienia
- 104
- Pobrania
- 820
- Wydruki
- 3
- Wyświetlenia
- 2794
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A sliding ashtray for cigar smokers inspired by an existing design with a beautiful cubatabacco logo on the front.
The ashtray allows you to let the cigar rest and also catch the ash while it rests.
Its not designed as a pocket ashtray, rather as a table ashtray.
I wanted to add magnets in the lid so that it stays closed but I was happy with the final design. I attached the .f3d for you to remix it if you like (add magnets or exchange the logo).
The rough dimensions are 13 x 5,5 x 5,5 cm.
Beware that leaving the consumable in the tray to let it go out might deform the ashtray due to the heat. I haven't experienced it yet, just a heads up.
I printed both parts upright like they're shown in the STL with Prusament PLA and standard settings on a Prusa Mini.
A bit sanding on the outside of the inner part is recommended so that it will move silently.