Miter Slot Runner - Customizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable miter slot runner generator. This is useful for making custom table saw and router table jigs. Variables…
- Ocena
- 4,5 / 5
- Polubienia
- 108
- Pobrania
- 480
- Wydruki
- 2
- Wyświetlenia
- 2371
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Customizable miter slot runner generator. This is useful for making custom table saw and router table jigs. Variables include length, number of holes, nut or countersink screw holes, optional t-groove.
Example print settings:
- Elegoo Neptune 2s
- Basic/cheap PLA
- 200C / 60C - nozzle/bed
- .28mm "Draft"
- Combing OFF
- Infill: 10%, grid
I found for my DeWalt 7491RS, printed as above, the ideal dimensions were:
- slot_width = 19.25; // 19.25 Perfect; 19.2 - hair loose, 19.3 snug in a few spots
- slot_height = 10.40;
But it took quite a bit of trial and error to dial in and you will likely need to do several 1-segment tests on your own equipment.
Source also available on GitHub: https://github.com/noise/miter-slot-runners
Original thing was created by Thingiverse user mythran, and is licensed under cc.
Additional changes made by n01s3.
Category: Machine Tools