Xbox Original OpenXenium Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Xbox Original mod chip holder for Open Xenium
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 306
- Wydruki
- 0
- Wyświetlenia
- 1846
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
While modifying the Original Xbox (XBOXOG) I noticed the OpenXenium Mod Chip didn't seem to be very stable and was moving a lot when plugged into the motherboard.
So I designed this simple but effective platform / holder that makes the modchip not move at all.
It wraps around the pin header of the modchip & pin header on the xbox.
You can print in any settings you wish, I went with Cura Dynamitic Quality & 20% infil.
Added a v2 for Xbox V1.2 - 1.3 boards due to a small smd cap at the side. (RedOverlord feedback)
Added a new style of clip, this one just clips around the OpenXenium and has one leg to keep it up. It is a tight fit !!
Shout out to the MakeMhz discord for all the positive feedback! If you haven’t joined their discord, great place for support and their XboxHD+ mod.
2024 Update:
I have been made aware of someone selling this model on eBay, so I have reached out to the seller to give credit to where they have gotten the model from. I don't mind people selling as a 3D printable service, but please give credit to the original design !!