Echo Dot Outlet Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We got tired of tripping on the long cable and dropping our echo dot, so I made this
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 491
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Echo dot outlet mount!
This keeps the cable organized and your echo out of the way! Also the assembly with the dot can slide on and off of the outlet cover if you decide you'd rather just have the 2 outlets.
This model requires the following hardware:
- 4 - M3 screws, 20mm
- 4 - M3 screws, 12mm
- 8 - M3 Nuts
- 4 - M3 Washers
- 1 - Screw that should already be in the outlet
Print 1ea of the 3mf files. Screw the slide and slide_mirrored pieces to the outlet cap using the 12mm M3 screws and nuts Replace your existing outlet cover with the 3d printed one, including the screw. Screw the brace and brace mirrored piece into the dot holder, with the M3 washers in between the braces and the holder. Use the 20mm M3 screws and nuts for this part. Slide the dot holder assembly onto the outlet cover assembly and voila! There is a hole in the bottom of the holder large enough for the power cable and an auxillary cable.