Cassette Shelving System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom cassette shelf that can be customized to fit your record cabinet.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 1319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
A custom cassette shelf that can be customized to fit your record cabinet.
Print instructions
A shelving system for cassettes. I wasn't able to find anything that fit my shelf without wasting considerable space. With these files, you can build a shelf to whatever size you need.
The prints as uploaded are designed to fit on my Prusa i3 MK3S, and use 3/8" threaded rods, but you can customize it yourself: the fully parametric designs are available for Fusion 360 (see the "source" link under the files section). Just change the parameters used and make them any size, number of cassettes, etc. that you need.
This is designed to be pressure fit in a shelf, you can see from the photo above I have cut my 3/8" threaded rods to size and put them together with a connector, which can be expanded to fit into place. I applied some rubber pads to the feet to avoid them slipping about after being fit.
This could use a few adjustments, the feet get a bit in the way of the cassettes on the edge. In my case I just put cassettes that are in non-standard jewel cases at the edges.