3030 extrusion Cable clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little cable clip that slots into a 3030 extrusion (wallthickness 2mm) to aid in cable management
- Ocena
- 4,857 / 5
- Polubienia
- 53
- Pobrania
- 588
- Wydruki
- 9
- Wyświetlenia
- 1356
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Little cable clip that was designe by Vector3D in a lifestream but I could not find an online source so I copied the design and used it for my V-core 3 printer build.
My RatRig V-Core3.1 comes with extrusione with an average thickness approx. 2mm (actually more like 1.9mm). I recently learned that that is not always the case. Some extrusions might go to 2.2mm! As I have included the stepfile, please feel free to adapt.
(as somebody found the origanl model on github, I have included the link here as the original file. Credits go to Adam of V3D