Spoke Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this a while ago after I got hit by a car and many parts of my bicycle were suddenly broken. Hardware…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I designed this a while ago after I got hit by a car and many parts of my bicycle were suddenly broken.
Hardware required: This design depends on the threaded screws that the bike originally used for this piece. I was able to grab a small bag of replacement screws for less than a dollar at Lowes.
Print Settings
Printer:
Hictop 3DP-17
Rafts:
No
Supports:
No
Resolution:
0.25 mm
Infill:
20%
Filament:
Overture PLAWhite
Notes:
I had originally printed this piece in ABS but through normal wear and tear it broke off. I've had the PLA print on the bike and working great for over six months now.