1 / 27
DRO Mounting kit for Paulimot Sieg SX2.7L Mill
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DRO Mounting kit for Paulimot Sieg SX2.7L Mill Scales used: X-Axis: travel length 550mm Y-Axis: travel length 200mm…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 812
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (18)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (12)Powiązane
DRO Mounting kit for Paulimot Sieg SX2.7L Mill
Scales used:
X-Axis: travel length 550mm
Y-Axis: travel length 200mm
Z-Axis: travel length 300mm
X-Axis Mount:
- DRO_bracketX_Left.stl (1x)
- DRO_bracketX_Right.stl (1x)
- DRO_bracketX_Plate.stl (1x)
Y-Axis Mount:
- DRO_bracketY_Left.stl (1x)
- DRO_bracketY_Right.stl (1x)
- DRO_bracketY_Plate.stl (1x)
Z-Axis Mount:
- DRO_bracketZ.stl (2x)
- DRO_bracketZ_Plate.stl (1x)
- DRO_bracketZ_PlateMount.stl (1x)
Recommended Material:
- ABS (30% infill)
Remarks:
- The X-Axis scale is mounted on the front of the mill using the t-slot and the already existing holes. The reason for mounting at the front is that I did not want to loose any travel in the Y direction.
- I made cutouts in the Electronics cover for mounting the Z-Axis scale and the DRO bracket. The reason is that I do want to able to remove the Electronics cover without having to unmount the Z-axis scale and the DRO unit
- The X-axis lock handle and pin that come with the mill cannot be used anymore. I have created replacements for both the handle and the pin; the handle is narrower and the pin is much longer than the original.
Category: Machine Tools