1 / 8
Orbiter extruder rotated 180 degrees on EVA 3 carriage, and new belt attachment — zdjęcie 1
1 / 8

Orbiter extruder rotated 180 degrees on EVA 3 carriage, and new belt attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The idea is to have a belt attachment over EVA 3 carriage, and at same time using Orbiter 1.5 extruder and V6 hot end

Ocena
0 / 5
Polubienia
8
Pobrania
17
Wydruki
0
Wyświetlenia
374
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

May be you like to use Eva 3 carriage, but is not possible to mount it in your current printer, with this some modifications yo can change the point for belt attachment, and mount an Orbiter extruder simply turning it 180 degrees over Z axis

Tagi