Ender 3 S1 Extruder Ultimate Cooling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was not happy with the original cooling, also designes I found did not satisfy my - so I decided to make it better.
- Ocena
- 5 / 5
- Polubienia
- 117
- Pobrania
- 393
- Wydruki
- 3
- Wyświetlenia
- 6526
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The main idea is from this design: https://www.thingiverse.com/thing:5277750
I cound not get the CAD files so i designed from scratch in Fusion360 and made use od a partially scan of the extruder mounted on the axis.
It is devided into two parts, the mount for the part cooling fan and the mount for the hotend fan. For the part cooling I use 5015 turbine, 24V driven up to 50%. For the hotend 404020, 24V driven on 60%.
I will add a seperate mount part so one can only use part cooler.
For the part cooler You need the trihorn from here: https://www.thingiverse.com/thing:5398053
Also some M3 screws and nuts needed.
Print from ABS or PETG, flat with supports, 13% infill, 4 walls.
I recommend to relocate the crtouch probe to be in line with the axis with this part:
https://www.thingiverse.com/thing:5568032