Fillet Gauges 20 to 30mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed to measure a fillet greater than 20mm but couldn't find a gauge anywhere.
- Ocena
- 4,833 / 5
- Polubienia
- 6
- Pobrania
- 97
- Wydruki
- 7
- Wyświetlenia
- 282
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to measure a fillet that was somewhere in the 20 to 30 mm range and could find any models so I remixed my favorite set to accommodate my needs. The outer diameter is the same as DatumCAD's so if you're using them (like I am) this one will fit right in.
I did however make the inner diameter smaller to accommodate the larger radii. Also I used 2mm increments for the same reason.
No special print instructions.
Enjoy.
If you like what I'm doing here, please consider making a small donation. These funds help me (in part) maintain my volunteer efforts in Search and Rescue.