1 / 4
DIN Rail Adapter for Meanwell LRS-150-48
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount adapter for Meanwell LRS-150-48 onto a DIN rail
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 529
- Wydruki
- 6
- Wyświetlenia
- 1909
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 6)Remiksy (0)Kolekcje (98)Powiązane
As I needed to mount my Meanwell LRS-150-48 PSU to my VCore3 printer, I designed this mount adapter. It doesn'r require supports of printed as seen in slicer pics.
You need 3x M3 6mm BHCS bolts and one M3 heat-insert (best with 4.6mm OD and a max height of 5mm). Using SHCS Screws might interfere with the DIN rail itself, due to the higher bolt heads.
This design was inspired by the great DIN Rail bracket: https://www.printables.com/model/97222-din-rail-bracket