Scanguage II Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Scanguage is a plug-in OBDII reader, which provides useful guages for vehicles that lack them. The Scanguage is a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The Scanguage is a plug-in OBDII reader, which provides useful guages for vehicles that lack them.
The Scanguage is a great tool, but you really need a way to fasten the darn thing down so it doesn't slide all over the place in the vehicle. Rather than put velcro on the guage itself, I wanted to have a snap-in holder that could help direct the cord, and which would fit in multiple vehicles.
This was designed in UG, but will be redesigned in OpenSCAD at a later date.
OBDII has been standard in vehicles in the US since 1998, and is accessible via a receptacle at the bottome of the dash on the driver's side of the vehicle.
Instructions
Printed initially on a Makerbot Replicator 2, at 0.2 layer height with 20% infill.
Category: Automotive