Duplo brick generator - sloped bricks and roofs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version of Duplo brick generator, where you can generate sloped bricks and roofs.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 813
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
Version of Duplo brick generator, where you can generate sloped bricks. Not perfect, there some bugs but works fo some basic designs.
There a STL file for standart sloped brick with 2x3x2 70676 base which is default in the generator.
It doesn't really work for another standart sloped brick 2x2x1,5 6474, so I made some extra tweaks and generated STL file for it too.
I have put extended ridges by default on, so it's easier to print without supports. However you might need to test that.
Edit in v5: I have fine tuned the parameters (base_unit = 15.5 and ridge_width = 3.15) from the original remixed duplo generator, so bricks now better fit at the bottom side. However you might still to do slight adjustments for your particular printer, print material and extruder.
You are welcome to improve on it!